A hair clog is one of the most common clogs that everyone encounters at some time in their lives.
Even if you employ a drain stopper, hair can build in your lines over time, forming ugly clumps that significantly slow down or choke up your drains.
The good news is that you don’t need to quit shaving or take dramatic measures to avoid this issue.
Baking Soda Technique
Try a natural option of baking soda, white vinegar, and boiling water before reaching for those harsh chemicals.
Baking soda, on the other hand, offers several advantages. It not only dissolves hair down the drain but also contains disinfectant characteristics that may battle odor, germs, and fungi.
- You should pour one cup of baking soda into the plugged tub drain. You should add one cup of vinegar right away.
- The combination will begin to bubble together.
- Pour boiling water down the drain five minutes after the fizzing stops.
- After flushing the drain, turn on the faucet to ensure the water drains properly.
- If the drain remains clogged, repeat steps 1 through 3.
- Pour one cup baking soda and one-half cup salt down the drain and let it rest overnight for tough blockages.
- The next day, flush with hot water.
Yanking your hair will most likely be more effective if the above method doesn’t work. You will be needing a few tools to carry this method out such as a portable light, some gloves so as to not get your hands dirty, a screwdriver, and nose pliers that are precise.
- First you will have to take off the stopper of your drain. You might be able to take your stopper off straight away, but you’ll most likely require a screwdriver.
- You should have a clean entry to the drain below after removing the plug. If you shine the flashlight into the drain, you’ll likely see a clump of hair.
- Put on your gloves and reach in with your needle-nose pliers to grasp the hair.
- After removing the hair, pour hot water down the drain before reinstalling the stopper to ensure everything is in working order.
Use A Plunger
Plungers are among the most common home appliances used to unclog drains. Several plungers are on the market, each intended to function with a certain type of drain.
Use a sink or regular plunger to clean and unclog all other things in your bathroom. Because the cup must rest level over the drain, it is best suited for flat surfaces such as a sink or tub. Here’s how you unclog a drain with a plunger:
- Plunge the plunger down the drain.
- Fill the sink, tub, or shower with water until the plunger is immersed.
- Pump the plunger down and up six or seven times quickly.
- Check whether the water drains away when you remove the plunger from the drain opening. If not, repeat the procedure.
- Pour hot water down the drain once the clog has been removed to rinse away any debris.
Get A Plumbing Snake
If melting your hair clog with baking soda and vinegar, plunging it out, and using tweezers to remove it hasn’t worked, you may be able to break that clog apart using a snaking device.
- Straightening a wire hanger and inserting it down your drain to break apart a blockage can work in less severe circumstances.
- Other times, you might wish to invest in a zip-it tool. These plastic drain cleaners are inexpensive, disposable, and simple to use, and they are commonly accessible online.
- There are also a variety of additional drain snake gadgets available at your local hardware store or online, each built to cope with obstructions of varied sizes.
- This method should help get rid of any obstructions and scrape your drain walls clean and free them of all the hairs clogging it up.
- If this method does not work effectively, you may want to drain it or clear your drain with the use of boiling and steaming hot water to ensure the clog is entirely gone.
Take Out The Drain
When all else fails, it’s time to take things seriously. The drain may need to be removed.
This is a more complicated procedure than the others described below, so we’ll walk you through it step by step:
- Take out the stopper.
- Insert the plug wrench into the drain opening and secure it to the drain’s crossbars.
- To get all of the hair out of your drain you should grip the plug wrench and crank it counterclockwise.
- Eject the plug and insert the pliers once your drain has been freed.
- Use your needle-nose pliers around the “X” crossbar in the drain to secure them.
- Grip the needle-nose pliers as tightly as possible with your regular pliers or wrench. Turn the locking needle-nose pliers counterclockwise with the pliers or wrench.
- When the drain is loose enough, crank the needle-nose pliers by hand until the drain is completely removed.
- After you’ve removed the entire drain, carefully clean it in a basin or bucket.
- Remove any hair lodged in the drain mechanism before replacing it.