25 DIY Drying Rack Designs That Are Easy To Build

by craftyclub

Nowadays, drying racks are popular, and almost every home has one. While these racks can be easily installed anywhere inside the house, they provide a perfect replacement for the outdoor washing line.

These products are widely available on the market to assist you in locating the finest solution for your needs. They come in designs made of steel, wood, and plastic. There is no need to worry if one thinks that these racks are a little expensive. You may create your drying rack for little cost by using one of these 25 DIY drying rack projects.

1. DIY Ceiling Mounted Clothes Drying Rack

How to Make a DIY Ceiling Mounted Clothes Drying Rack
How to Make a DIY Ceiling Mounted Clothes Drying Rack (from B Vintage Style)

This ceiling-hanging drying rack is pretty simple to create and adds some style to your laundry area too.

Follow this step-by-step guide to ease your laundry job and make it much more fun.

At first, you need to measure the area with a measuring tape and then cut out the rack accordingly. Add some hooks to the walls. Attach the chain to the rack and secure it on the hooks. All done. Now, enjoy the freshly washed drying time.

2. Folding Diy Clothes Drying Rack

Folding Diy Clothes Drying Rack
Folding Diy Clothes Drying Rack (from The Carpenter’s Daughter)

Make this practical DIY drying rack for your home to enjoy your laundry time with this foldable drying rack.

The whole build is made from lumber (wood) and made into sections. The top, bottom, and sides of the folding part of the rack are cut with precision. The sides hold the dowels that support the clothes. Next up, clamp the sides together and lay out positions for the holes. Use a drill press to drill the holes halfway through the sides. Cut out the dowels that will fit the holes. Lastly, assemble all the things and for the final step, you will need some hinges to couple the pieces in sections.

3. Fold Down Drying Rack

Fold Down Drying Rack
Fold Down Drying Rack (from Sleek Chic Interiors)

To get started with this project, you need to make the frames for the horse. For the outer part, cut the top, bottom, and sides all into 3*1 dimensions. Cut the timber to the appropriate size and assemble the pieces into a frame using screws. Drill holes in the timber to sit in the dowels. Also, you may use wood glue to secure the dowels.

Cut out a square inner frame and add a couple of hinges on both sides of the frame and this will act as a folding part. Add twines to either side with knots on the ends to prevent it from slipping. Now, paint it any color you like.

Fix the main frame to the wall using screws and it’s ready to add some glamour to your laundry room!

4. Easy Ladder Laundry Drying Rack

Make This Easy Ladder Laundry Drying Rack!
Make This Easy Ladder Laundry Drying Rack! (from One Creative Mommy)

This DIY project is elementary and requires no extra skill.

As the name suggests, it is a ladder-shaped drying rack suitable for drying purposes. The construction idea is the same. The dowels and the sides are cut accurately, and the spacing between the rungs is done as per the choice.

Holes are made and the ladder rungs are glued nicely. Make sure to give it ample time to dry.

Once it dries, fasten up some hooks on the sides. Attach a chain to the hasps, and you are all done! A complete ladder rack is ready to add some style to your laundry corner.

5. DIY Clothes Drying Rack

Make This: DIY Clothes Drying Rack
Make This: DIY Clothes Drying Rack (from Curbly)

This DIY clothes dryer is all you might want to try if you plan to save money and enjoy troubleless laundry.

This rack is made entirely from wooden dowels and copper pipe fittings. Start by cutting the dowels to the desired size. Sand the rough pieces. Now, to assemble, use wood glue to get together the copper pipe fittings to the dowels. Next up, dry all the parts. Drill some holes for the hinges to be attached on both sides. Then, tie a small loop to the end of the dowel on either side. And you are good to go!

6. Simple Wall-Mounted Laundry Rack

Build a simple wall-mounted laundry rack to dry your delicates in style
Build a simple wall-mounted laundry rack (from Popular Science)

For most of us, it is always a trouble to find a place for drying our perfectly washed clothes. But thanks to these amazing DIY ideas, it does not seem to worry us anymore.

This project is a basic build. All that is required is patience and care.

Read also:  20 Dog Sweater Crochet Patterns to Keep Pooches of All Sizes Warm and Cozy this Winter

The initial steps are essentially the same and involve the cutting of the top, bottom, and sides to perfect dimensions, gluing the frames, making holes for the dowels, sanding to get rid of any rough edges, and finally attaching the hinges.

Lastly, you may want to paint your rack and mount it against the wall using screws.

7. DIY Ceiling Clothes Dryer

DIY Ceiling Clothes Dryer
DIY Ceiling Clothes Dryer (from An Edited Lifestyle)

Let us crack on this incredible, straightforward DIY to make your laundry easier.

This DIY project is divided into two parts. Part one is to cut the metal, drill holes through it, stick the dowels to the rod, probably with glue, and then leave it to dry.

For the other part, cut a length of rope and attach a ring pulley to both ends of the frame. This is done to join the dryer to the pulley systems in the ceiling and the hooks.

That is it! This creative design is worth trying.

8. Diy Wall-mounted Laundry Drying Rack

Diy Wall-mounted Laundry Drying Rack
Diy Wall-mounted Laundry Drying Rack (from Capturing Wonderland)

This drying rack will surely be your space saver and is a low cost compared to purchasing.

Initially, you need to measure the space and then draw out the frames accordingly which includes the two sideboards and one top board.

The dowels are cut to 34 inches in length and spacing is determined. Next, holes are drilled and dowels are attached. The top is fixed to the side boards using screws or glue. To connect the outer frame to the inner one, use hinges.

As a final step, install a couple of drywall anchors and screws and hang your wall-mounted drying rack which would look perfect for everyday use.

9. DIY Clothes Drying Rack

DIY Clothes Drying Rack
DIY Clothes Drying Rack (from Reno For Less)

This is cool clothes drying rack that anyone can make at home.

The first thing is to measure the desired height of the drying rack. Also, make sure of the length of the lumber. Scrap off any rough surfaces. Put wood conditioner to even out the stain you will use after it is dried. The hanger rod is painted matte black in contrast.

Now, drill the lumber into the studs already marked on the wall. Attach the rod prepared earlier to the lumber and the job is done!

10. Laundry Wall Mount Drying Rack from Floor Standing

DIY Laundry Drying Rack (Wall Mount from Floor Standing)
DIY Laundry Drying Rack (from Two it Yourself)

This one is a four-legged drying rack that takes up minimal space in your laundry room. It is best described as a cluster of cross-sectional dowels with wooden sides.

Using a jigsaw cut out the pieces and glue the dowels to the sides. Drive a screw through the back legs of the rack. Use plumber tape and clamps to hang the rack against the wall.

There you go! This DIY is budget friendly and convenient to use.

11. Wall Mounted Laundry Drying Rack

DIY Wall Mounted Laundry Drying Rack
DIY Wall Mounted Laundry Drying Rack (from What BB Built)

Sick of drying your delicates in an electric dryer, and the heavy electric bills? Well, this DIY is the ultimate solution to your never-ending problems.

To make this rack, all you require is to cut two frames one will form the exterior part that would be drilled into the wall and the interior frame will have dowels or rods to hang your clothes. Use glue and tiny hole bolts to build the board.

After drilling holes for the rods, assemble the inner frame using wood glue and screws and attach the hinges. Lastly, add hooks and chains to support your frames

The drying rack is all set to be mounted on the wall!

12. How to Make a DIY Laundry Drying Rack

How to Make a DIY Laundry Drying Rack
How to Make a DIY Laundry Drying Rack (from Dunn Lumber)

Since the design of this DIY rack is so uncomplicated, you can easily modify it to fit into your space.

The four legs of this drying horse are cut evenly with a jigsaw and four additional pieces are cut to make up the top. Meanwhile, cut eight dowels 32 inches in length. The measurements need to be precise.

After making the required measurements, drill holes at exact marks. Now, sand the edges to make them smooth and even.

Get together the frames by gluing the dowels into the holes of the frame. You can use screws too. It is time to add wood plugs and hinges to attach the frames.

To put an end, add twine by threading it through the holes so that it holds the two frames in place.

Read also:  25 Unique Toothbrush Holders You Can Make At Home

13. PVC Drying Rack

Diy ceiling mounted clothes drying rack
Diy ceiling mounted clothes drying rack (from Two Inspire)

Laundry can be an uphill task, especially in the case when you don’t have a spacious apartment. However, instead of buying expensive drying racks, you can construct your customized rack at a low cost.

For this purpose, cut PVC pipes ( readily available in the market) to the right length and width. Drill holes at regular intervals along the pipe. The pipes are assembled into a square shape with the help of conduit bindings and then stick together. A washing line was laced into the holes. The thread is attached to the pulley system on the ceiling. This helps to lift the rack when not in use or drawn when needed.

14. Make Your Own Laundry Room Drying Rack

Make Your Own Laundry Room Drying Rack–Easy DIY Project
Make Your Own Laundry Room Drying Rack (from Home Staging in Bloomington Illinois)

This product will be your favorite when it comes to drying clothes in a rock-bottom space.

The first step is to construct the box considering the size of the wooden rack you already have. Give more depth to your casket. Leave a quarter of an inch space between the box and the frame.

The four side planks were sized, cut to the proper lengths, and joined with butt couplings. The placement of holes is an essential part of the process. Hence, one needs to be careful where to drill them.

Insert a screw through the bottom hole and into the box back while leaving the top pit unlocked. Screw into a wall stud using that second hole.

So now you have it, guys! A drying rack you created without spending much cash.

15. Ultimate Laundry Folding Table

Make The Ultimate Laundry Folding Table, Complete With Pull-Out Sweater Drying Racks
Make The Ultimate Laundry Folding Table (from Crafted by the Hunts)

What can be crazier than this DIY drying rack with sliding drawers to free up extra space in your home?

It is your task to assess the proper height of the folding table and when that is done, cut five pieces of plywood. Two out of these constitute the middle leg when stuck together. Drill holes near corners and screw them.

The countertop is incredibly easier to make. Take a plywood piece and cut it to the appropriate dimensions. Glue and nail the corners. Drill holes along the legs.

To make the drawers, cut out the dowels and tape some of them together. Now, drill holes for your dowels and assemble your drying racks with glue and screws.

The best part is assembling the table with the drying drawers. That could be time-consuming as well. But when it is all done, you probably have the ideal drying item to fulfill your need.

16. Hockey Drying Rack

Hockey Drying Rack
Hockey Drying Rack (from Ana White)

This DIY is a must-try if you are looking for a unique and cheap drying rack to fit your space nicely.

All you need are hockey sticks, bolts and pegs, and hooks. This do-it-yourself is incredibly easy to make. You may use a saw miter to cut everything perfectly. Join the pieces, 2 rods in the middle and four on the sides creating a rectangular base. It makes it a strong base. Now, add the two one-by-three pieces along the length of the long, chief stick. Add the cup hooks and the extended clasps on the back.

There you go! The simple slim-fit design is ready to be placed anywhere in the house.

17. Pull-out Sweater Drying Rack

How to make a Pull-out Sweater Drying Rack
How to make a Pull-out Sweater Drying Rack (from Sawdust Girl)

This project has its vitality and purpose.

It is a pullout rack similar to a drawer adjusted anywhere within any open space to dry your winter stuff like sweaters. What essentially makes it different is the netting covering the drawer rack.

Make a frame out of the wooden pieces. Insert holes through the side pieces and a couple of them on the front and back sections. Now, attach the dowels with super glue.

This drawer-netted style rack is essential for drying sweaters, shawls, and other winter things and is much more convenient to use.

18. Diy Hanging Drying Rack

How to make a D.I.Y. hanging drying rack
How to make a D.I.Y. hanging drying rack (from Bunnings)

This design is meant to save you some space and money.

The mechanism is based on a pulley system that can easily be adjusted according to your need.

Cut two sides and five rail pieces to the right lengths and sand them with sandpaper. Next up, drill the sides and the dowels precisely and sand the holes. To fix the rails on the sides, screw through the pits.

At last, apply two coats of varnish and leave it to dry. After drying attach leather straps at the end of the side pieces and secure them with screws. Then, go ahead and fit in hooks and suspend the pulleys from these hooks. Also, thread a rope through it to hang your rack.

Read also:  Cedar Fence Stain: a Guide

19. Diy Drying Rack

Diy Drying Rack
Diy Drying Rack (from The Merrythought)

If you are searching for a product that can bear a heavy laundry load, then this DIY is the best option! And here is why?

This rack is movable and can be shifted anywhere within or outside the house. In cases where you want to expose them to sunlight, you can place these on a terrace or rooftop. Plus, it has extra capacity for drying quite a lot of things. Interestingly, you can fold it up and enjoy your free time.

20. Cabinet Door Drying Rack

Cabinet Door Drying Rack
Cabinet Door Drying Rack (from Rogue Engineer)

To build this door-style rack, you need to make calculations on the space available and make your measurements. This rack holds 30 doors which makes it an extraordinary piece!

The whole construction is two U-shaped frames with plywood in the corners to give it support. The frames are roughly 36 inches apart. On each side with a four inches gap, holes are drilled. Through the holes, dowels are inserted between the frames.

Use an HVLP paint sprayer to paint the cabinet doors. There you have it! A home-built rack in no time.

21. DIY Laundry Room Drying Rack

DIY Laundry Room Drying Rack
DIY Laundry Room Drying Rack (from Centsational Style)

These look so cool in the laundry.

You need birch plywood (since it’s strong and practical), some hooks, screws, boards, hinges, and porcelain knobs.

After fabricating the frame, use wood filler to fill in the gaps to give a smooth finish and spray paint it.

Affix the frame with the board using hinges and place it on the wall.

With a slash lock, you can fold it back when not in use. Drill holes on the board to attach knobs and the job is done!

22. Star Shaped Clothes Drying Rack

DIY Star Shaped Clothes Drying Rack
DIY Star Shaped Clothes Drying Rack (from A Piece of Rainbow)

This DIY is one the top of the list for it is different and gives the illusion of a fancy item when fully expanded.

This rack costs pretty less since it is made almost from scratch.

With the help of a circular saw cut multiple strips of plywood. Clamp the pieces together and mark the center for the holes. The dowels will go into the holes and firmly hold the strips. Rotate the exterior strip so that the pits are pointing in the same direction. Connect the strips with dowels and repeat the steps.

This is truly magical!

23. Folding Door-Mounted Drying Rack

Folding Door-Mounted Drying Rack
Folding Door-Mounted Drying Rack (from By Brittany Goldwyn)

This rack is meant to be placed on the door and can be folded back too.

On a wooden plank construct the two frames; one with regular dowels inserted at intervals and the other without dowels. The frames are connected to the board employing screws. Also, sash locks are important when you fold the rack back up. To give extra stability, add the chain to one side of the frame.

Hang the entire set on any door with the help of a door hanger.

This can be called a masterpiece!

24. Pull Down Drying Rack

DIY Pull Down Drying Rack
DIY Pull Down Drying Rack (from Imperfectly Polished)

For this DIY you need to construct the outer frame which will be screwed to the wall and the inner frame which will be attached to the outer frame through hinges.

The inner one will have dowels for holding delicate clothes.

To keep the frame from going all the way down, use rope and bring it through the holes drilled on the top of the two frames. Add a knot at the end of the holes.

25. A DIY Laundry Rack for the Bathroom

A DIY Laundry Rack for the Bathroom
A DIY Laundry Rack for the Bathroom (from Home Dzine)

This DIY is all you need to store your delicates inside your bathroom.

Make some pre-hand calculations and you are good to go!

Drill holes at the desired area and attach the outer frame. Using PAR pine build the inner frame having bars to hang your clothes. Connect the two employing hinges. Mount it on the wall and chain it on the sides to give it support.

This is an excellent choice for drying your fabrics especially when you have a drain below since you don’t have to worry about the dripping!

You may also like

Leave a Comment